Have you ever puzzled why your automatic watch stopped suddenly? It certainly frightens you to see your watch stop ticking, yet this is a typical problem for watchmakers.
Customers frequently complain that their timepieces abruptly ceased operating after hours of normal operation. In addition, there are occasions when the dial displays the wrong time in the morning because it stopped working the night before.
While this type of circumstance is not new to watchmakers, it is nonetheless important to understand why it occurs and what the likely causes are. This article will explain why your automatic watch may have stopped operating.
ANALYSIS OF THE WATCH
If you believe your automatic watch has stopped, first examine the timepiece because it could be experiencing a momentary halt due to inactivity. You can gently swing it off to test if it works again.
You can also try winding the watch a few times to see if it works again. In other words, evaluate the watch and attempt basic troubleshooting methods. If, on the other hand, it is a quartz watch, the problem could be the battery.
However, if the watch still does not operate after the assessment, the following are some possible causes.
• Screw Loose
Having a loose screw is one possible reason why your watch stopped functioning. The loosened screw is probably blocking the internal mechanism of the timepiece and it causes the movement to halt.
This is a common issue because even regular hand and wrist motion can cause a screw to get loose. If you suspect that this maybe the case, seek help from an authorized watch repairman and have your timepiece checked.
Your watch also tends to get loose screws if you are always playing rigorous sports such as golf.
• Broken Mainspring
The mainspring is an important component of any clock. It is conceivable that 90 percent of the spring will be torn because the material has been exposed to natural aging processes or has been subjected to excessive clamping pressure.
The mechanism in automatic watches prevents the rotor from overtightening. The likelihood of an ancient timepiece to attain its maximum tension is high. If this occurs, the spring will break and, if left ignored, may cause severe damage to your watch.
• Improper Winding Process
This is linked to a faulty winding mechanism, which could be related to the collision at the rotor. When winding a watch, it is critical not to overwind it in order to avoid destroying the rotor. Over-winding it, on the other hand, risks damaging your clock.
• Movement has been obstructed by dirt.
Every timepiece should have a maintenance check-up at least once every few years. If the watch hasn't been maintained, dirt and dust buildup are more likely.
Make it a practice to get your watch serviced and cleaned by a competent repairman to avoid this. At the very least, you can avoid dust accumulation, which can eventually damage the watch's rotor.
Watches are also machines. Wear and tear on a watch is normal, but if it goes untreated, it can further harm the rotor and cause the timepiece to fail permanently.
As a result, if your watch abruptly stops in the midst of the day, use this guide to investigate some possible causes.